Association of obesity and menarche SNPs and interaction with environmental factors on precocious puberty.

BACKGROUND: Obesity is an important cause for the precocious or early puberty. However, the association between obesity-related loci and the risk of precocious puberty as well as the effect of gene-environment interaction are unclear, especially in the Chinese children population. METHODS: This was a case-control study using baseline data from two cohorts and hospital cases in China. 15 SNPs loci and several environmental factors were included in the analysis of 1201 participants. Chi-square test and logistic regression were used to analyze the association between SNPs and precocious puberty. Additionally, exploratory factor analysis was conducted on 13 environmental variables, and then to explore their interaction with genes on precocious puberty. RESULTS: The effect allele C of rs571312, and G of rs12970134 MC4R were associated with precocious puberty in girls with obesity. Regarding the gene-environment interaction, we found that when girls were in the high socioeconomic status, the rs571312 (OR: 3.996; 95% CI: 1.694-9.423) and rs12970134 (OR: 3.529; 95% CI: 1.452-8.573) risk genotypes had a greater effect on precocious puberty. CONCLUSIONS: The obesity risk gene polymorphisms MC4R rs571312 and rs12970134 were associated with precocious puberty in Chinese girls with obesity, and girls with risk genotypes and high socioeconomic status should be given extra attention. IMPACT: This is the first study that identified the association between rs571312 and rs12970134 of MC4R gene and precocious puberty in Chinese children. We found that when girls were in the high socioeconomic status, the risk genotypes of rs571312 and rs12970134 had a greater effect on precocious puberty. The results of this study have great public health implications. It is recommended that girls who are in high socioeconomic status and have a high genetic risk for early sexual maturity should closely monitor their pubertal development and consider early intervention strategies.

The association between sleep and early pubertal development in Chinese children: a school population-based cross-sectional study.

Background: There is an increasing tendency toward early pubertal development, and sleep might be related to pubertal onset. We aimed to investigate the association of sleep duration and bedtime with early pubertal development. Methods: This was a cross-sectional study of 8,007 children (53.6% boys) from Qufu city, Shandong province and Zhongshan city, Guangdong province, China. Data on sleep duration and bedtime were obtained by questionnaire. Early pubertal development was the primary outcome and it was evaluated by the pediatrician according to Tanner staging. Logistic regression models were used to separately examine the association between sleep duration or bedtime and early pubertal development, controlling body mass index (BMI), dietary pattern, soft drink, feeding pattern and mother's BMI. Results: In boys, short sleep duration was strongly related to early pubertal development [OR (95%CI): 4.26 (1.30, 13.94)], and this association was intensified after adjusted BMI, dietary pattern, soft drink, feeding pattern and mother's BMI. In girls, OR (95%CI) was 1.62 (1.04, 2.51), and increased after controlling BMI. Bedtime was associated with early pubertal development on weekdays [OR (95%CI): 6.39 (1.54, 26.45) in boys and 1.93 (1.23, 3.05) in girls], but not on weekends [OR (95%CI): 2.49 (0.61, 10.21) in boys; 1.31 (0.76, 2.25) in girls]. Conclusion: This study underscores the positive association between the risk of early pubertal development and insufficient sleep duration and late bedtime.

PDI-Based Organic Small Molecule Regulated by Inter/Intramolecular Interactions for Efficient Solar Vapor Generation.

Organic small molecules with processing feasibility, structural diversity, and fine-tuned properties have the potential applications in solar vapor generation. However, the common defects of narrow solar absorption, low photothermal conversion efficiency, and photobleaching result in limited materials available and unsatisfactory evaporation performance. Herein, the perylene diimide (PDI) derivatives are exploited as stable sunlight absorbers for solar vapor generation. Particularly, the N,N'-bis(3,4,5-trimethoxyphenyl)-3,4,9,10-perylenetetracarboxylic diimide (PDI-DTMA) is well-designed with donor-acceptor-donor configuration based on plane rigid PDI core. The efficient photothermal conversion is enabled through strong intermolecular π-π stacking and intramolecular charge transfer, as revealed by experimental demonstration and theoretical calculation. The PDI-DTMA with a narrow band gap of 1.17 eV exhibits expanded absorption spectrum and enhanced nonradiative transition capability. The 3D hybrid hydrogels (PPHs) combining PDI-DTMA and polyvinyl alcohol are constructed. With the synergistic effect of solar-to-heat conversion, thermal localization management, water activation, and unobstructed water transmission of PPHs, the high water evaporation rates can reach 3.61-10.07 kg m-2 h-1 under one sun. The hydrogels also possess great potential in seawater desalination and sewage treatment. Overall, this work provides valuable insights into the design of photothermal organic small molecules and demonstrates their potentials in solar water evaporation.

Superelastic 3D Assembled Clay/Graphene Aerogels for Continuous Solar Desalination and Oil/Organic Solvent Absorption.

Superelastic, arbitrary-shaped, and 3D assembled clay/graphene aerogels (CGAs) are fabricated using commercial foam as sacrificial skeleton. The CGAs possess superelasticity under compressive strain of 95% and compressive stress of 0.09-0.23 MPa. The use of clay as skeletal support significantly reduces the use of graphene by 50%. The hydrophobic CGAs show high solvent absorption capacity of 186-519 times its own weight. Moreover, both the compression and combustion methods can be adopted for reusing the CGAs. In particular, it is demonstrated a design of 3D assembled hydrophilic CGA equipped with salt collection system for continuous solar desalination. Due to energy recovery and brine transport management promoted by this design, the 3D assembled CGA system exhibits an extremely high evaporation rate of 4.11 kg m-2  h-1 and excellent salt-resistant property without salt precipitation even in 20 wt% brine for continuous 36 h illumination (1 kW m-2 ), which is the best reported result from the solar desalination devices. More importantly, salts can be collected conveniently by squeezing and drying the solution out of the salt collection system. The work provides new insights into the design of 3D assembled CGAs and advances their applications in continuous solar desalination and efficient oil/organic solvent adsorption.

Effects of childhood obesity and related genetic factors on precocious puberty: protocol for a multi-center prospective cohort study.

BACKGROUND: Childhood obesity has important effects on the onset and development of puberty. Although a number of studies have confirmed the relationship between obesity and precocious puberty, little is known about the pleiotropic genes of obesity and precocious puberty and the interaction between genes and environment. There are four objectives: (1) to analyze the incidence of precocious puberty in the general population in China; (2) to verify the direct effect of obesity on children's precocious puberty using a variety of methods; (3) to verify the effect of obesity and its risk gene polymorphism on precocious puberty in a prospective cohort study; and (4) to analyze the interaction effect of genes and environment on pubertal development. METHODS: We will conduct a multi-center prospective cohort study in three cities, which are selected in southern, central, and northern China, respectively. Primary schools in these cities will be selected by a stratified cluster random sampling method. Primary school students from grade 1 to grade 3 (6 to 10 years old) will be selected for the cohort with extensive baseline data collection, including assessment of pubertal development, family demographic information, early development, sleep pattern, dietary pattern, and physical activity. Participants will be followed up for at least three years, and long-term follow-up will depend on future funding. DISCUSSION: The findings of this multicenter prospective population-based cohort study may expand previous related puberty development research as well as provide important information on the mechanism of early puberty. Targeted interventions can also be developed to improve adolescent health problems related to puberty development based on the available evidence. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT04113070 , prospectively registered on October 2, 2019.

Exposure to antibiotics and precocious puberty in children: A school-based cross-sectional study in China.

Foods and water can be contaminated with antibiotics in China, which may affect children's health, but evidence on antibiotic exposure with precocious puberty (PP) is limited. This study explored the association of antibiotic exposure with PP in a school-based setting. A cross-sectional study with multistage stratified cluster random sampling was conducted in Zhongshan City, Guangdong Province and Qufu City, Shandong Province in China from October 11 to December 5, 2019. A first-morning urine sample was collected to detect antibiotic exposure. We detected 33 of 45 types of antibiotics from eight categories in 928 primary school children aged 6-12 years using HPLS-MS/MS. Detection rate of antibiotics was stratified by sex, study site, and BMI. The Tanner stages were assessed by professional pediatricians from local hospitals. PP is defined as the onset of secondary characters before 8-year-old or menarche before 10-year-old for girls and before 9-year-old for boys. Multivariable logistic regression was performed to examine the association between antibiotic exposure and PP after adjusting potential confounders. The overall detection rate of antibiotics was 93.0% in 928 children. We found the detection rate of tetracyclines and fluoroquinolones in children with PP was significantly higher than that of children with normal puberty (41.4% vs 29.9%, 56.8% vs 50.6%, respectively, all p < 0.05). Both fluoroquinolones (odds ratio (OR): 1.835, 95% confidence interval (CI): 1.066-3.158) and tetracyclines (OR: 2.120, 95% CI: 1.175-3.825) were associated with increased OR of PP after adjusting sex, age, BMI, study site, and family income. Specifically, compared to the values less than the limits of detection, low concentration of ofloxacin from fluoroquinolones (OR: 2.056, 95% CI: 1.091-3.875) and high concentration of chlortetracycline (OR: 3.027, 95% CI: 1.126-8.140) and tetracycline from tetracyclines (OR: 2.756, 95% CI: 1.167-6.506) were associated with increased OR of PP. Exposure to antibiotics, especially fluoroquinolones and tetracyclines was positively associated with precocious puberty.

Skin-Inspired Hair-Epidermis-Dermis Hierarchical Structures for Electronic Skin Sensors with High Sensitivity over a Wide Linear Range.

The quest for both high sensitivity and a wide linear range in electronic skin design is perpetual; unfortunately, these two key parameters are generally mutually exclusive. Although limited success in attaining both high sensitivity and a wide linear range has been achieved via material-specific or complicated structure design, addressing the conflict between these parameters remains a critical challenge. Here, inspired by the human somatosensory system, we propose hair-epidermis-dermis hierarchical structures based on a reduced graphene oxide/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) aerogel to reconcile this contradiction between high sensitivity and a wide linear range. This hierarchical structure enables an electronic skin (e-skin) sensor linear sensing range up to 30 kPa without sacrificing the high sensitivity (137.7 kPa-1), revealing an effective strategy to overcome the above-mentioned conflict. In addition, the e-skin sensor also exhibits a low detection limit (1.1 Pa), fast responsiveness (∼80 ms), and excellent stability and reproducibility (over 10 000 cycles); as a result, the e-skin platform is capable of detecting small air flow and monitoring human pulse and even sound-induced vibrations. This structure may boost the ongoing research on the structural design and performance regulation of emerging flexible electronics.

Highly Stretchable Fiber-Based Potentiometric Ion Sensors for Multichannel Real-Time Analysis of Human Sweat.

Wearable potentiometric ion sensors are attracting attention for real-time ion monitoring in biological fluids. One of the key challenges lies in keeping the analytical performances under a stretchable state. Herein, we report a highly stretchable fiber-based ion-selective electrode (ISE) prepared by coating an ion-selective membrane (ISM) on a stretchable gold fiber electrode. The fiber ISE ensures high stretchability up to 200% strain with only 2.1% increase in resistance of the fiber electrode. Owing to a strong attachment between the ISM and gold fiber electrode substrate, the ISE discloses favorable stability and potential repeatability. The Nernst slope of the ion response fluctuates from 59.2 to 57.4 mV/dec between 0 and 200% strain. Minor fluctuation of the intercept (E0) (±4.97 mV) also results. The ISE can endure 1000 cycles at the maximum stretch. Sodium, chloride, and pH fiber sensors were fabricated and integrated into a hairband for real-time analysis of human sweat. The result displays a high accuracy compared with ex situ analysis. The integrated sensors were calibrated before and just after on-body measurements, and they offer reliable results for sweat analysis.

Rational Construction of 2D Fe3 O4 @Carbon Core-Shell Nanosheets as Advanced Anode Materials for High-Performance Lithium-Ion Half/Full Cells.

Transition metal oxides have vastly limited practical application as electrode materials for lithium-ion batteries (LIBs) due to their rapid capacity decay. Here, a versatile strategy to mitigate the volume expansion and low conductivity of Fe3 O4 by coating a thin carbon layer on the surface of Fe3 O4 nanosheets (NSs) was employed. Owing to the 2D core-shell structure, the Fe3 O4 @C NSs exhibit significantly improved rate performance and cycle capability compared with bare Fe3 O4 NSs. After 200 cycles, the discharge capacity at 0.5 A g-1 was 963 mA h g-1 (93 % retained). Moreover, the reaction mechanism of lithium storage was studied in detail by ex situ XRD and HRTEM. When coupled with a commercial LiFePO4 cathode, the resulting full cell retains a capacity of 133 mA h g-1 after 100 cycles at 0.1 A g-1 , which demonstrates its superior energy storage performance. This work provides guidance for constructing 2D metal oxide/carbon composites with high performance and low cost for the field of energy storage.

Nanostructures versus solid solutions: low lattice thermal conductivity and enhanced thermoelectric figure of merit in Pb9.6Sb0.2Te10-xSex bulk materials.

The series of Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) compounds with different Se content (x) were prepared, and their structure was investigated at the atomic and nanosized regime level. Thermoelectric properties were measured in the temperature range from 300 to 700 K. The Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) series was designed after the refinement of the single-crystal structure of Pb(3.82)Sb(0.12)Te(4) (Pb(9.6)Sb(0.3)Te(10); S.G. Pmm) by substituting isoelectronically in anion positions Te by Se. The Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x)() compounds show significantly lower lattice thermal conductivity (kappa(L)) compared to the well-known PbTe(1)(-)(x)Se(x) solid solutions. For Pb(9.6)Sb(0.2)Te(3)Se(7) (x = 7), a kappa(L) value as low as 0.40 W/m.K was determined at 700 K. High-resolution transmission electron microscopy of several Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) samples showed widely distributed Sb-rich nanocrystals in the samples which is the key feature for the strong reduction of the lattice thermal conductivity. The reduction of kappa(L) results in a significantly enhanced thermoelectric figure of merit of Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) compared to the corresponding PbTe(1)(-)(x)Se(x) solid solution alloys. For Pb(9.6)Sb(0.2)Te(3)Se(7) (x = 7), a maximum figure of merit of ZT approximately 1.2 was obtained at approximately 650 K. This value is about 50% higher than that of the state-of-the-art n-type PbTe. The work provides experimental validation of the theoretical concept that embedded nanocrystals can promote strong scattering of acoustic phonons.